I-MOVIX logo


PDF Print E-mail

 Phantom powered logo

UM+ Spine

 

Datasheet

Brochure

Description

Camera Box

 

X10 Spine3

 

  • Compatible with Vision Research latest generation HD camera ( v642,  Miro M320S, Flex, Flex 4K )
  • SMPTE Fiber Optic Connection
  • Red and Green Tally
  • Built‐in Intercom
  • Built-in Lens Remoting and Built‐in Lens Power Supply
  • 2 Microphone inputs
  • Video Returns

CCU

 

X10 CCU

 

  • HD‐SDI Replay Signal
  • HD‐SDI Live Signal
  • Size: 2U
  • Only One Channel Necessary on Disk Recorder
  • Two Return Video Inputs
  • Ethernet Connections between CCU and remotes
  • Bi‐level, Tri‐level Genlock
  • Intercom
  • Up to 1,000m between camera and CCU
  • Remote updates

OCP

  • Joystick control (Iris, Black, Preview)
  • RGB & Master Gains
  • RGB & Master Pedestals
  • Auto White/Black Gamma
  • Standard Color Matrix
  • Saturation
  • Flare compensation
  • Detail enhancement
  • Frame Rate/Shutter Control
  • Setup settings (Format, Genlock, etc.)
  • User pre‐sets
  • Remote updates

 

jogger and ocp

 

Slow Motion Remote ( Jogger )

  • User‐Friendly Slow Motion Remote
  • Easy Sequence Selection
  • Auto‐clip to EVS server
  • Instant Replay
  • Ramping of Speed within a Replay
  • Cueing System
  • Multi-­block Management
  • Compatible with EVS Hypermotion Mode and Evertz DreamCatcher

Videos

Note: The high speed movies are all taken with this camera. They have been greatly reduced in resolution and compressed in size so we can show them to you on the web. Movie quality directly from the camera is superior to what you will see here.


 

Specifications

OPERATIONAL CONTROL PANEL (OCP) 
User interface Joystick, Graphical TouchScreen, Rotary Knobs
Power connector XLR 4-­pin 12 Vdc
Control data RJ45 / Up to 100m between CCU and OCP
Dimensions (WxHxL) 99 x 116 x 355 (323) mm
Weight 2 kg (4.41 lb)
CAMERA CONTROL UNIT (CCU) 
General
Dimensions (WxHxD) 438 (19inch rack) x 88 (2U) x 465 mm
Weight 7 kg (15.43 lb)
Operation temperature 0-40 degrees C (32-­104 F)
Operation humidity Max 80 % (non-­condensing)
Connectors
SDI-out 2 x BNC 1ch 1.0Vp-­p 75 Ω
SDI-­in 2 x BNC 1ch 1.0Vp-­p 75 Ω
Control data RJ45 x 3
Tally (R, G) Input Relay Contact
Genlock SD Analog Black Burst (Bi-­Level) or HD Tri-­Level Sync
Hybrid Fiber Connection LEMO FMW.3k93C. SMPTE 304 Tajimi/Fischer/Rosenberger Connector (optional)
Video Output & Input Formats
Video Output & Input Formats HD-­SDI 1080i 50/59.98/60
HD-­SDI 720p 50/59.98/60
Intercom – Audio
Line Level +4dBu Nominal
Intercom ENG/PROD 4-wire System (Balanced)
Intercom PGM Balanced Input
Microphone output 2 x 3-­pin XLR
Head set connector 5-­pin XLR
Volume control ENG, PROD, PGM
Power
Power requirements AC 80V to 240V, 47 to 63 Hz
Power connector IEC type, 3-­pin male
Power consumption 280VA max. with camera 
SLOW MOTION CONTROL 
Controls Jog, Shuttle, Buttons
Power Connector XLR 4-­pin 12 Vdc
Control data RJ45 / Up to 100m between CCU and slow motion remote
Dimensions (WxHxL) 164 x 80 x 255 mm
Weight 1.5 kg (3.3 lb)
INTERCOM – AUDIO 
Head set connector 5-­pin XLR
Microphone input 2 x 3-­pin XLR
Volume control ENG, PROD, PGM

 

Copyright - Servicios Corporativos SLAM 2010-2014