PDF Print E-mail



      • Available in LAB body style
      • 1,380 fps at 1920 x 1200
      • >2,200 fps at 1152 x 1152 square resolution
      • 3.2 Gpx/s throughput
      • 1 µs minimum exposure, global shutter
      • 10 µm pixel size
      • 12-bit pixel depth
      • Phantom CineFlash compatible

                All Phantom Miro cameras are small, lightweight, rugged digital high-speed cameras packed with advanced features. The cameras have features previously available on cameras at twice the price, are easy to learn and use, and address applications in a wide variety of industries.

                The Miro 320 performance level is available in the LAB body style targeted at indoor/laboratory environments.

                The Miro 320 is a 2 megapixel camera with 3.2 Gigapixels/second (Gpx/s) throughput. This translates to 1380 fps at 1920 x 1200, or over 1500 fps at 1920 x 1080. Frame rates up to 325,000 fps are available at reduced resolutions. The Miro 320 uses microlenses on its custom-designed CMOS sensor with 10 um pixel pitch to achieve great light sensitivity, and with 12-bit pixel depth you can expect excellent image quality.

                Scientists and engineers can take advantage of the 3.2 Gpx/s throughput, precise timing, camera synchronization, flexible triggering, excellent light sensitivity, and many other advanced features to gain insight into products and processes. The camera allows you to see what cannot be seen with the human eye. Applications ranging from animal studies to PIV to product characterization are now possible with this accessible camera.

                Each Miro camera is compatible with Vision Research's new and unique CineFlash storage technology. These removable, non-volatile storage devices slide into the camera body and provide a way to quickly save shots from the camera's memory without the need for time-consuming and costly downloads. Later, remove the CineFlash module from the camera and insert it into the docking station connected to a computer. Cines stored on the CineFlash are now immediately available on the computer. You can also transfer the cines from the camera to your computer and edit the images using our Phantom Camera Control software (PCC). CineFlash modules and the associated CineFlash Docking Station are available as accessories to the Miro LAB320.

                Each Miro camera supports four lens mounts: Nikon F/G, C, PL or EOS. EOS mounts allow the use of Canon EF and EF-S automated lenses. Adjust lens aperture and focus remotely using Phantom Camera Control software.

                The camera also has a number of other advanced features including an internal capping shutter, Image-Based Auto-Trigger, camera synchronization, immediate playback of recorded cines, and more!

                What's in the Box...

                • Power supply
                • Ethernet cable
                • Two BNC cables
                • Phantom PCC software

                * Measured according to ISO 12232:2006 method



                  Note: The high speed movies are all taken with this camera. They have been greatly reduced in resolution and compressed in size so we can show them to you on the web. Movie quality directly from the camera is superior to what you will see here.

                  All images where shot using The Phantom Flex, Phantom Miro M-320S and the new Phantom 4K Flex with Arri Ultra prime lenses and Chris Bryan Films custom underwater housing's. Please visit my website for more info: WWW.CHRISBRYANFILMS.COM

                  This is the underwater housing used with the Miro


                  Make sure to visit our Channel!
                  Canal de YouTube


                  Resolution/Speed (fps)
                  1929 x 1200
                  1920 x 1080
                  1152 x 1152
                  1024 x 1024
                  1280 x 800 2,960
                  1280 x 720 3,280
                  896 x 720 4,400
                  512 x 512 9,330
                  384 x 228
                  256 x 256 27,600
                  128 x 128
                  128 x 64 121,900
                  128 x 8 325,000

                  Short Description

                  • This >2 megapixel camera with 3.2 Gpx/s throughput sets a new standard for price/performance and ease-of-use in the high-speed imaging industry. The maximum resolution is 1920 x 1200, but other common resolutions such as 1152 x 1152 are also available. At 1920 x 1080 HD resolution, the camera can shoot over 1500 frames-per-second. And, the camera sports a number of advanced features such as: CineFlash storage, Canon EOS lens mount, and internal capping shutter, all in a small, rugged package. Available only in the LAB style. See the Phantom Miro 320S Cameras for other styles.


                  • 3.2 Gpx/s
                  • Maximum speed at full resolution of 1920 x 1200 is 1380 fps
                  • At 1920 x 1080, you can achieve over 1500 fps and at 1152 x 1152, over 2200 fps
                  • Maximum speed at reduced resolution of 64 x 8 is 325,000 fps
                  • Minimum frame rate of 24 fps
                  • Shutter speeds down to 1 microsecond

                  Sensor Specifications

                  • CMOS sensor
                  • 1920 x 1200 pixels
                  • 10 µm pixel size
                  • 19.2 mm x 12.0 mm
                  • 12-bit depth
                  • ISO Monochrome 5,000D; 12,500T
                  • ISO Color 1,250D; 1,600T
                  • TE cooled
                  • CAR in 64 x 8 increments
                  • Fill factor: 70%
                  • Dynamic range: 55 dB
                  • Read out noise at 21.6°C (typical): 21e-
                  • Full well capacity (typical): 12100e-


                  • 1 µs minimum exposure
                  • Global electronic shutter
                  • Extreme Dynamic Range (EDR)
                  • Auto Exposure
                  • Shutter Off mode for PIV applications


                  • 6GB, 12GB high-speed internal RAM
                  • CineFlash support

                  Record Times

                  • Need to add column to table

                  Special Features

                  • Segment memory for up to 63 cines in multi-cine mode
                  • Image-Based Auto-Trigger
                  • Continuous recording
                  • Memory gate
                  • Event marking
                  • Frame timestamp
                  • IRIG In (modulated or unmodulated)
                  • IRIG Out (unmodulated)
                  • Shutter off mode for PIV exposure
                  • 1.4µs straddle time (mono)
                  • Burst mode
                  • Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
                  • Secondary IP address
                  • Field-based firmware upgrade capable


                  • Programmable trigger location (pre/post trigger recording)
                  • Image Based Auto Trigger standard
                  • Trigger from software
                  • Hardware trigger on capture cable

                  Timing & Synchronization

                  • 20ns timing accuracy
                  • Frame synchronization to internal or external clock (FSYNC)
                  • IRIG In (modulated or unmodulated)
                  • IRIG Out (unmodulated)


                  • Capture connector (Trigger, IRIG In, Video, IRIG Out, Aux1, Aux2)
                  • (Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate)
                  • (Aux2 signal can be assigned to Ready or Strobe)
                  • Dedicated FSYNC and Trigger connection on camera body
                  • In software there is an Aux3 assignment that allows IRIG Out to be reassigned to Strobe
                  • There is no analog video on this camera, instead there is HD-SDI

                  Ethernet Connection

                  • Gb Ethernet for control and data

                  Camera Control

                  • Phantom Camera Control software (PCC)
                  • Flip-out LCD Touchscreen on LC-Series only
                  • Remote Control Unit (RCU)
                  • SDK available

                  Video Out

                  • HD-SDI from BNC on rear of camera. Standard 720P, 1080i and 1080psf signals are supported.


                  • The following mounts are available:
                  • Canon EOS
                  • Nikon F-mount
                  • Nikon F mount adapter (allows the use of F-mount lenses on EOS mount)
                  • 1" C-mount
                  • PL-mount

                  Video Processing

                  • Brightness
                  • Gain
                  • Gamma
                  • Saturation
                  • Hue
                  • White Balance
                  • Color interpolation algorithm
                  • Flare
                  • Pedestal
                  • Tone curve
                  • Filters
                  • Color matrix
                  • Image flip and rotate
                  • Crop
                  • Scale

                  Data Acquisition

                  • Native Support in PCC
                  • National Instruments X- and M- Series

                  Motion Analysis

                  • Basic measurements via Phantom Application:
                  • Distance
                  • Speed
                  • Acceleration
                  • Angles and Angular Speed
                  • Compatible with 3rd party solutions

                  Supported File Formats

                  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX


                  • 12 - 28 VDC, 65 W
                  • 100 - 240 VAC power supply included
                  • Rechargeable battery (Sony BP-U30 or BP-U60)

                  Mechanical Specifications

                  • See chart (add link)

                  Environmental Specifications

                  • See chart (add link)


                  • Phantom SDK
                  • LabView
                  • MatLab

                  Ships Standard with

                  • Power supply
                  • Ethernet cable
                  • Battery; Sony BP-U30 or BP-U60 rechargeable, external charger required
                  • 120GB CineFlash and dock
                  • Mini Break-out-Box
                  • PCC software


                  • Upgrade bundled 60GB CineFlash to 120GB or 240GB
                  • Lens mount choice

                  Popular Accessories

                  • Remote Control Unit
                  • Spare batteries, battery charger
                  • Additional CineFlash modules




                  Copyright - Servicios Corporativos SLAM 2010-2014