PDF Print E-mail



  • Small, rugged, powerful high-speed camera
  • 6Gpx/second throughput, 1 Megapixel resolution
  • 1400 frames per second at 2560 x 1600, 2500 fps at 1920 x 1080
  • 18, 36 or 72GB RAM
  • Exposure Index range: Mono 6400 – 32,000 D; Color 2000 – 10,000 D
  • Includes Programmable I/O, SDI and HDMI video outputs
  • Available in L (Light) or S (Full Featured) models 
  • S version includes CFast 2.0 media, On-camera controls, aditional 3G HD-SDI port, aditional signals


                  Phantom VEO® high-speed cameras are compact, rugged and packed full of features to enable a variety of traditional and advanced imaging applications.

                  The VEO640S camera model uniquely doubles as an incredible research tool and a high-speed camera suited to the media industry thanks to the 35mm 2.5K resolution sensor, on-camera controls, CFast 2.0 media and a compact 5.6 lb (2.5kg) 5-inch (12.7cm) cube form factor for compatibility with specialty and remote rigs.

                  The VEO 640 is a 4 megapixel camera with over 6 Gigapixels/second (Gpx/s) throughput. This translates to the ability to record up to 1400 frames-per-second (fps) at its 2560 x 1600 resolution, or over 2500 fps at 1080p HD. The top speed at reduced resolution is 300,000 fps. With the maximum RAM configuration of 72 GB, at 1400 fps the VEO 640 provides over 8 seconds of record time.

                  All Phantom VEO camera models are available in two body styles, L and S.  The L-model includes everything needed for traditional software-based capture and motion analysis.  The S-model includes additional signal availability, on-camera controls, ruggedized connectors and compatibility with removable CFast 2.0 storage media.  Both models include 3G HD-SDI and HDMI outputs and our new versatile Programmable I/O infrastructure. 

                  Choose the body style, memory configuration and lens mount that works best for your application and budget.  Nikon F/G, C-mount, PL-mount and Canon EF (with electronic access to aperture and focus) lens mounts are available. 

                  VEO cameras are built tough and rated to withstand up to 30G as configured or up to 100G without the internal mechanical shutter option which is standard on all models. The internal components are completely isolated which protects the electronics for long-term reliability. 

                  * Measured according to ISO 12232:2006 method

                  What’s in the Box…

                  • Power supply
                  • Ethernet cable
                  • SDI video cable
                  • Phantom PCC software
                  • Printed manual


                  Note: The high speed movies are all taken with this camera. They have been greatly reduced in resolution and compressed in size so we can show them to you on the web. Movie quality directly from the camera is superior to what you will see here.

                  Working right now on some new material...

                  Make sure to visit our Channel!
                  Canal de YouTube



                  Resolution/Velocidad (fps)
                  2560 x 1600
                  2560 x 1440
                  2048 x 1600
                  1600 x 1600 2,000
                  1920 x 1080 2,500
                  1280 x 1280 3,500
                  1280 x 720 5,250
                  512 x 512 12,000
                  256 x 256 28,000
                  256 x 64 89,000
                  128 x 4 300,000

                  Short Description

                  • Phantom VEO cameras are compact, rugged and full of high-end features. The 640 model captures at over 800 frames-per-second at one megapixel resolution.
                  • Programmable I/O, SDI video, Canon EOS lens support and optional CFast 2.0 recording media are just a few of the features you will appreciate. Available in both L and S styles.


                  • 6 Gpx/second
                  • Max speed at full resolution of 2560 x 1600 is 1,400 fps
                  • Max speed at reduced resolution of 128 x 4 is 300,000 fps
                  • Minimum frame rate of 24 fps

                  Sensor Specifications

                  • CMOS sensor
                  • 1280 x 800 pixels
                  • 20 µm pixel size
                  • 25.6 mm x 16.0 mm
                  • 12-bit depth
                  • ISO Monochrome 6,400 D
                  • ISO Color 2,000 D
                  • E.I range 2,000 - 10,000 (color); 6,400 - 40,000 (mono)
                  • TE cooled
                  • CAR in 64 x 8 increments


                  • 1 µs minimum exposure
                  • Global electronic shutter
                  • Exposure Index (E.I.) for controlling apparent ISO
                  • Extreme Dynamic Range (EDR)
                  • Auto Exposure
                  • Shutter Off mode for PIV


                  • 18 GB, 36 GB, 72 GB high-speed internal RAM
                  • On-board removable CFast 2.0 cards (S-models) up to 256GB

                  Record Times

                  • 12 seconds at maximum frame rate, largest resolution and into maximum internal memory

                  Special Features

                  • Segment memory for up to 63 cines in multi-cine mode
                  • Continuous recording
                  • Programmable I/O
                  • HD-SDI and HDMI video
                  • Event marking
                  • Frame timestamp (IRIG SMPTE or MISP)
                  • IRIG in/out (modulated and unmodulated)
                  • Shutter off mode for PIV exposure
                  • Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
                  • Image-Based Auto-Trigger (IBAT)
                  • One 12 VDC, 6W auxiliary power port
                  • Secondary IP address
                  • Field-based firmware upgrades


                  • Programmable trigger location (pre/post trigger recording)
                  • Image-Based Auto-Trigger
                  • Trigger from software
                  • Trigger from on-camera controls (S-model)
                  • Hardware trigger BNC

                  Timing & Synchronization

                  • 20 ns timing accuracy
                  • Frame synchronization to internal or external clock (FSYNC)
                  • IRIG in/out (modulated or unmodulated)


                  • Dedicated Trigger and Timecode In BNCs on camera body
                  • Range Data input on S-model camera body (Fischer)
                  • Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more

                  Ethernet Connection

                  • Gb Ethernet for both control and data. Fischer port on S-models; RJ45 port on L-models

                  Camera Control

                  • On-Camera Controls (OCC) on S-model camera
                  • Phantom Camera Control (PCC)
                  • SDK available

                  Video Out

                  • 3G HD-SDI and HDMI on all VEO models.
                  • Additional 3G HD-SDI BNC port on back.
                  • Supports up to 1080p60.


                  • Nikon F-mount standard, supports F & G style lenses
                  • Canon EOS mount optional
                  • PL-mount optional
                  • C-mount optional
                  • (lens not included)

                  Video Processing

                  • Brightness
                  • Gain
                  • Gamma
                  • Saturation
                  • White Balance
                  • Pedestal
                  • Tone curve
                  • Filters
                  • Color matrix
                  • Image flip and rotate
                  • Crop
                  • Scale

                  Data Acquisition

                  • National Instruments M- and X-Series DAQ modules with integrated support in PCC

                  Motion Analysis

                  • Basic measurements via Phantom Application:
                  • Distance
                  • Speed
                  • Acceleration
                  • Angles and Angular Speed
                  • Manual and Automatic point collection for target tracking
                  • Compatible with 3rd party solutions

                  Supported File Formats

                  Cine RAW, Cine Compressed, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX


                  • 100 - 240 VAC, 16-32 VDC via primary power input.
                  • 65 Watt 24V power supply included
                  • Secondary power input, down to 12V via capture port on S-model cameras

                  Mechanical Specifications

                  • Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm
                  • Weight: 5.6 lbs (2.5 kg)

                  Environmental Specifications

                  • Operating Temperature: -10°C - 50°C
                  • Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)
                  • Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)


                  • Phantom SDK
                  • LabView
                  • MatLab

                  Ships Standard with

                  • Power supply
                  • Ethernet cable
                  • SDI DIN Cable
                  • Phantom PCC software
                  • Getting Started Guide


                  • Canon EOS lens mount
                  • PL-mount
                  • On-camera controls

                  Popular Accessories

                  • Handle
                  • Cheese Plate



                  Copyright - Servicios Corporativos SLAM 2010-2014