- 4K at up to 1,000 fps
- Global shutter, switchable to Rolling shutter
- Color ISO 320T (Rolling shutter); 640T (Global shutter)*
- Recommended EI range is 800-1000
- 10Gb Ethernet option for optimal workflow
- Includes all VEO-S features: CFast 2.0 media compatibility, On-camera controls, HDMI, 3G-SDI, secondary battery input
Phantom VEO4K® high-speed cameras are compact, rugged and packed full of features. The VEO4K-PL has been customized for media applications with a black housing and features required for cinematography such as an optical low pass filter and PL mount. It can be thought of as Phantom Flex4K-GS image performance in the convenient form factor of a Phantom VEO. At its full 4096 x 2304 resolution the VEO4K-PL is capable of capturing up to 938 frames per second (fps), or 1000 fps at 4096x 2160. A reduction of vertical resolution will further increase the speed. The sensor can operate in global shutter (standard) or rolling shutter mode for increased dynamic range and to eliminate the need for black references. With the maximum RAM configuration of 72 GB, at 1000 fps the VEO4K-990 provides more than 5 seconds of record time. The VEO4K-PL includes all the features of the VEO-S model cameras, including on-camera controls, ruggedized connectors and compatibility with removable CFast 2.0 storage media. The camera is available with 10Gb Ethernet for an optimal workflow, and it includes 3G HD-SDI, HDMI outputs and Programmable I/O. VEO cameras are known for being built tough enough to perform in difficult environments, and are rated to withstand up to 30G as configured or up to 100G without the internal mechanical shutter option (which is standard on all models). The internal components are completely isolated which protects the electronics for long-term reliability. * Measured according to ISO 12232:2006 method What’s in the Box… Power supply Ethernet cable SDI video cable Phantom PCC software Printed manual Note: The high speed movies are all taken with this camera. They have been greatly reduced in resolution and compressed in size so we can show them to you on the web. Movie quality directly from the camera is superior to what you will see here. Phantom VEO4K-S - Portability and Workflow
Testing Anti-Viral Protective Masks using Schlieren Imaging
Phantom VEO 4K-S - 4K Image Quality in a Compact Design.
Also visit our YouTube Phantom
Resolution/Velocidad (fps) 4096 x 2304 938 4096 x 2160 1,000 4096 x 1152 1,850 2048 x 2048 1,050 2048 x 1152 1,850 2048 x 1080 1,970 Short Description Phantom VEO cameras are compact, rugged and full of premium features. The 4K-PL model is tailored for the media industry, offering 4K resolution at up to 1000 fps. The VEO4K-PL includes on-camera controls, support for CFast cards, 3G-SDI outputs and a secondary battery input in a black housing with support for many cine-style accessories. Throughput/Speed 9 Gpx/second Max speed at full resolution of 4096 x 2304 is 938 fps At 4096 x 2160 max speed is 1000 fps At 2048 x 1080 max speed is 1977 fps Minimum frame rate of 24 fps Sensor Specifications CMOS sensor 12 bits pixel depth 4096 x 2304 pixels 6.75 µm pixel size 27.6 mm x 15.5 mm Super-35mm; 31.7mm diagonal Super-16mm format at 1920 x 1080 Global Shutter (GS): Base ISO 640T Color; 5000T Mono Rolling Shutter (RS): Base ISO 320T Color; 2000T Monochrome Recommended Exposure Index range: 1000-1600 Color; 10,000-20,000 (GS); 4000 - 8000 (RS) Monochrome Exposure 5 µs minimum exposure Rolling shutter and Global shutter modes (switchable) Exposure Index (E.I.) for controlling apparent ISO VEO4K also supports rolling shutter mode for increased dynamic range and limited need for black reference. In rolling shutter mode the scan time is 1-millisecond Memory 72 GB high-speed internal RAM Support for on-board removable CFast 2.0 cards up to 512GB Record Times 6 seconds at maximum frame rate, largest resolution and into maximum internal memory Special Features 10Gb Ethernet (optional) Continuous recording Programmable I/O HD-SDI and HDMI video Event marking Frame timestamp (IRIG SMPTE or MISP) IRIG in/out (modulated and unmodulated) Segment memory for up to 63 cines in multi-cine mode Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR) Image-Based Auto-Trigger (IBAT) One 12 VDC, 12W auxiliary power port 7.5 µs straddle time Secondary IP address Field-based firmware upgrades Triggering Programmable trigger location (pre/post trigger recording) Trigger from camera body or software Trigger from on-camera controls (S-model) Hardware trigger BNC Timing & Synchronization SMPTE time code support Frame synchronization to internal or external clock (FSYNC) IRIG in/out (modulated or unmodulated) Signaling Dedicated Trigger and Timecode In BNCs on camera body Range Data input on S-model camera body (Fischer) Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more Ethernet Connection Gb Ethernet (standard) 10Gb Ethernet (optional) for control and data downloads. Camera Control On-Camera Controls (OCC) on S-model camera Phantom Camera Control (PCC) SDK available Video Out 3G HD-SDI and HDMI on all VEO models. Additional 3G HD-SDI BNC port on back. Supports up to 1080p60. Lensing PL-mount and Optical Low Pass Filter (OLPF) are standard Canon EOS mount optional (compatible with Flex4K-style EOS mount) PL-mount optional C-mount optional (VEO-4K specific) F-mount optional (compatible with v-Series F-mount) Video Processing Brightness Gain Gamma Saturation White Balance Pedestal Tone curve Filters Color matrix Image flip and rotate Crop Scale Data Acquisition National Instruments M- and X-Series DAQ modules with integrated support in PCC Motion Analysis Basic measurements via Phantom Application: Distance Speed Acceleration Angles and Angular Speed Manual and Automatic point collection for target tracking Compatible with 3rd party solutions Supported File Formats Cine RAW, Cine Compressed, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX Power 100 - 240 VAC, 16-32 VDC via primary power input. 80 Watt 24V power supply included Secondary power input, down to 12V via capture port on VEO4K-PL Mechanical Specifications Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm Weight: 5.6 lbs (2.5 kg) Environmental Specifications Operating Temperature: -10°C - 50°C API’s Phantom SDK LabView MatLab Ships Standard with Power supply Ethernet cable SDI DIN Cable Phantom PCC software Getting Started Guide Options Canon EOS lens mount F-mount C-mount Popular Accessories Cine Essential kit with handle, riser, cheeseplates V-Lock and Gold-mount side Battery mounts Cameo VEObob for added power outputs and remote port Case with custom foam
Description
Applications
Specifications
